This works really well in XC8


//*******************************
//*******************************
//********** DELAY #uS **********
//*******************************
//*******************************
void ds18b20_delay_us(volatile unsigned char us_count)		//input value will be in W. "Volatile" attribute prevents an "unused" warning.
{
#asm
temp_ds18b20_dlyloop:
	addlw   0xFF					;1 clk  0xff=-1, 0xfe=-2, etc			//<<<<<<<<<<<<<<<<<<<<SET AS NEEDED
	btfsc   STATUS,0				;1 clk   will be clear if W was smaller than 1,2,etc
	goto    temp_ds18b20_dlyloop	;2 clks
#endasm
}

 

USEFUL?
We benefit hugely from resources on the web so we decided we should try and give back some of our knowledge and resources to the community by opening up many of our company’s internal notes and libraries through mini sites like this. We hope you find the site helpful.
Please feel free to comment if you can add help to this page or point out issues and solutions you have found, but please note that we do not provide support on this site. If you need help with a problem please use one of the many online forums.